Here is a list of all class members with links to the classes they belong to:

- r -

• ramp() : gr_squelch_base_cc , gr_squelch_base_ff
• ran1() : gr_random
• rate() : gri_agc_cc , gri_agc_ff
• rayleigh() : gr_random
• rayleigh_complex() : gr_random
• read() : gr_circular_file , fusb_ephandle_win32 , usrp_basic_rx , i2c , i2c_bitbang , fusb_ephandle , fusb_ephandle_darwin , fusb_ephandle_generic , fusb_ephandle_linux , fusb_ephandle_ra_wb
• read_aux_adc() : usrp1_sink_base , usrp1_source_base , usrp_basic , usrp_basic_rx , usrp_basic_tx
• read_buffer() : audio_alsa_source
• read_control() : ppio , ppio_ppdev
• read_data() : ppio , ppio_ppdev
• read_eeprom() : usrp1_source_base , usrp_basic , usrp1_sink_base
• READ_FAILED : usrp1_sink_base , usrp1_source_base , usrp_basic
• read_i2c() : usrp1_sink_base , usrp1_source_base , usrp_basic
• read_io() : usrp1_sink_base , usrp1_source_base , usrp_basic_rx , usrp_basic_tx
• read_items() : gr_file_descriptor_source
• read_pointer() : gr_buffer_reader
• read_status() : ppio , ppio_ppdev
• readable() : gr_select_handler
• ready() : gri_goertzel
• reference() : gri_agc2_ff , swig::PySequence_InputIterator< T, Reference > , swig::PySequence_Cont< T > , gri_agc2_cc , gri_agc_cc , gri_agc_ff
• relative_rate() : gr_block
• release() : omni_mutex , mld_mutex_t
• release_dummy() : omni_thread
• remove() : s_node< T >
• remove_value() : omni_thread
• reseed() : gr_random
• reserved : __pthread_mutexattr_t , __pthread_attr_t , __pthread_condattr_t
• reserved1 : __pthread_transp_t
• reserved2 : __pthread_transp_t
• reserved3 : __pthread_transp_t
• reserved4 : __pthread_transp_t
• reserved5 : __pthread_transp_t
• reserved6 : __pthread_transp_t
• reserved7 : __pthread_transp_t
• reset() : gr_single_pole_rec< o_type, i_type, tap_type > , gr_single_pole_avg< o_type, i_type, tap_type > , gr_single_zero_avg< o_type, i_type, tap_type > , gri_lfsr_15_1_0 , gr_single_zero_rec< o_type, i_type, tap_type > , gri_lfsr_32k , sdr_1000_base , s_buffer , circular_buffer< T > , gr_single_pole_iir< o_type, i_type, tap_type > , gr_single_pole_iir< gr_complex, i_type, double > , circular_buffer< T >
• reset_counts() : gr_error_handler , gr_base_error_handler
• reset_read_pointer() : gr_circular_file
• restore_rx() : usrp_basic_rx
• restore_tx() : usrp_basic_tx
• result_type : swig::from_oper< ValueType >
• root_raised_cosine() : gr_firdes
• rotate() : gr_rotator
• run() : gr_single_threaded_scheduler
• runlength() : gr_check_lfsr_32k_s
• rx_enable() : usrp_basic_rx
• rx_freq() : usrp_standard_rx , usrp1_source_base

---